Titan Water Pro - Titan RO1000
1:1 system ratio
Membrane: One AXEON-1000-HF TFC membrane element. The highest flow membrane for maximum rejection 98.5% nominal (96% minimum) of impurities.
Stage 1: Sediment Filter High Flow pleated sediment filter, washable and reusable.
Stage 2: Carbon Block 5 Mic - Chlorine, VOC's Removal
Stage 3: RO Membrane Low Pressure (80 PSI) 1000 GPD
Membrane Flush Valve: for easy cleaning and significant extension of membrane life.
Test Conditions: Permeate flow and salt rejection based on 550 ppm, 80 psi, 77°F (25°C), pH 7, and 50% recovery
Note: Higher TDS and/or lower temperatures will reduce the system's production.Great for restaurants, distilleries, breweries, hydroponics and many more applications.
Membranes are tested at 77 degree Fahrenheit temperature and 60 PSI water pressure. (Best efficiency & Production)
*If you have very hard water, to prevent scaling/fouling of membrane, pre-water treatment is recommended